500W High Power Wattage Adjustable Sliding Ceramic Tube Wire Wound
Power Resistor
We also can make uncommon product per customers requirements.
Features:
1, Resistance range: 0.33 ohm ~33K ohm
2, Power : 500W
3, Work Temperature: -55 ~+275 C
4, Resistance tolerance: 5%, 10%.
5, Good heat-durability,low temperature coefficient,and high
capacity of short time overload
6, The resistor’s surface coats green incombustible paint.
Surface glazed, won't be easily polluted or eroded by chemistry
gas, hi8gh insulating capacity, can resist himidity and heat well,
can be use in the atrocious environment.
Good overload and heat durability capacity, the useful time is
longer than the others.
Test Item Test Condition Performance
Temperature coefficient ±300ppm/
Short time overload R≤±(2%R0+0.05R)
Resistance to soldering heat R≤±(1% R0+0.05R)
Solerability The soldering area is over 95%
Temperature cycling R≤±(1% R0+0.05R)
Load life in humidity R≤±(5% R0+0.05R)
Load life in heat R≤±(5% R0+0.05R)
Nonflammability No visible flam
Why choose Winsun?
High puriy material make sure catalytic converter high max working
temperature,
Tight tolerance make sure the catalytic converter right
installation.
Large quantity of catalytic converter in stock ensured fast
delivery.
Large capacity reduce catalytic canverter of materical prices.
Our service:
Inquiry response: Your inquiries will be replied in 24 hours.
Sample support: Two free samples are available in 3~5days.
Delivery time: Your shipment will be loaded in 5-7days.depends on
quantity
| Description | Power | Tolerance | Range |
HPR High power ceramic tube wire-wound resistors | 10W,25W,50W,75W,100W,150W,200W,300W, ,400w,500w,600w,800w,1000w,1200W,1500W,2000W | ±5% ±10% | 0R1-100K |
BHR Glaze high power ceramic tube wire-wound resistors |
FHR Flat type high power ceramic tube wire-wound resistors | 10W,20W,30W,40W,55W,70W,95W | ±5% ±10% | 1R-100K |
| Test Item | Test Condition | Performance |
Temperature coefficient
| Test the resistance value at normal temperature added 100℃,calculate per ℃ resistance value rate. | ±350ppm/℃ |
Short time overload
| According 10 times rated power to account the voltage or max .overload voltage (get the lower)for 5 seconds. | ΔR≤±(2%R0+0.05Ω) |
Resistance to soldering heat
| Immerge into the 350±10℃ tin stove for 2~3 seconds. | ΔR≤±(1%R0+0.05Ω) |
Solderability
| Immerge into the 260±5℃ tin stove for 2~3 seconds. | The area of soldering is over 95% |
Temperature cycling
| At -55℃ for 30 min,then at +25℃ for 10~15 min,then at +275℃ for 30 min,then at +25℃ for 10~15min, total 5 cycles. | ΔR≤±(1%R0+0.05Ω) |
Load life in humidity
| Overload rated voltage or Max. working voltage(get the lower) for
1000 hours (1.5 hours on and half-hours off) at the 40±2℃ and 90~95% relative humidity. | ΔR≤±(5%R0+0.05Ω) |
Load life in heat
| Overload rated voltage or Max. working voltage(get the lower)m for
1000 hours (1.5 hours on and half-hours off) at the 70±2℃. | ΔR≤±(5%R0+0.05Ω) |
Nonflammability
| Respectively load AC voltage by5,10,16 times rated power for 5 min. |
No visible flame
|
Contact Details:
Contact: Angel Sun
Tel: +86-13528847020
Email: Admin@winsunhk.cn
Skype: Angelsun618
Whatsapp: 13528847020
Wechat: 13528847020
QQ: 553695308
